Wichtiger Hinweis: In der Zeit vom 25.02 - 06.03 erfolgt aufgrund von Betriebsferien kein Versand. Bestellungen werden weiterhin angenommen. Vorher platzierte Bestellungen werden versendet.

High Temperature Heater Cartridges

69,90 €
Auf Lager
Art-Nr.
e3d_High_Temperature_Heater_Cartridges

Heaters capable of operating up to 550°C for extended periods of time. For printing high temperature thermoplastics. Come with high ampage connectors and extension leads, the cartridge has the wires exiting at a 90° angle from the casing with a strain relief.

Voltage: 12V/24V

Power: Up to 65W

Max operating temp: 550°C.

Lead length: 2m

⚠️WARNINGS⚠️

- These heaters are more than capable of reaching temperatures that will soften the aluminium block shipped as standard with our heaters. These must only be used with a copper block. We also recommend coupling this with a copper nozzle, as the hardened nozzles will lose some hardness at these temperatures, and the copper will offer better thermal conductivity.

- For the 12V version, some printers' electronics are not able to withstand the current required by the heaters. If this is your case, or you don't want to risk blowing your board up, please purchase the MOSFET switch daughter board sold with the SuperVolcano

Mehr Informationen
HerstellerE3D
Eigene Bewertung schreiben
Sie bewerten:High Temperature Heater Cartridges
Ihre Bewertung
Copyright © 2016-2019 makerdise™ - Alle Rechte vorbehalten.