129,00 €
Auf Lager

Specialised System

Experimental switching single-output HotEnd for 3D printing afficionados

Two Inputs, One Output

Two HotEnds in one; automatic switching from one to the other!


Much lighter than mounting two V6 HotEnds side by side!

Modular Ecosystem

Swap out blocks and nozzles from the full E3D ecosystem, or easily switch to the Chimera HotEnd

Multi-Extrusion Ecosystem

Add Multi-Extrusion capability to your machine with the easiest, most versatile, and highest performance HotEnds in the industry. E3D has a range of modular systems which give you the ability to create printers that can print a wide range of colours and materials in a single object, in one print.

All our multiple extrusion systems share some core design principles:

  • Our signature E3D All-Metal, high performance design for fantastic prints in every material, every time.
  • Easy to level nozzles make getting started in dual extrusion easier than ever before.
  • Absolute minimum size and weight, won’t weigh down your machine or reduce printing performance

2 Inputs, 1 Output Extrusion System

Cyclops introduces a new way of printing multiple materials not yet seen before in commercially available hotends. By taking 2 input materials and printing them alternately from a single nozzle Cyclops is able to eliminate ooze problems that are inherent in conventional dual extrusion systems. This new approach has been working excellently for us in testing at E3D, but we are releasing it now as an experimental product as we are still figuring out the best techniques for using this new HotEnd type.

Printing with a switching HotEnd is an exciting new frontier, although software and electronics setup are fairly simple and we are seeing great results here at E3D we want to be up-front about the status of this product. We are still developing the best techniques, settings and procedures to get beautiful reliable prints every time. Cyclops takes some extra learning and getting used to and may require a little tinkering and tuning to get awesome prints. If you're looking for a more conventional system then Chimera may be a better fit for your needs.

Modular Ecosystem.

Chimera and Cyclops are close relatives, and also inherit components from the V6 family. This means that you can easily change a Chimera into a Cyclops or vice-versa.

Genuine Reseller

E3D Genuine Reseller

Mehr Informationen
Hersteller E3D
Filament Durchmesser 1.75mm
Eigene Bewertung schreiben
Sie bewerten:Cyclops
Ihre Bewertung

Legends Dual-Extrusion Pack


  • 1 x Cyclops Heat Sink
  • 2 x Cyclops heat Breaks
  • 1 x Cyclops Heater Block
  • 1 x Cyclops 0.40mm Nozzle
  • 2 x Kraken Heat Breaks
  • 2 x V6 Heater Blocks
  • 2 x V6 0.40mm Nozzle (1.75mm Filament)
  • 2 x Bowden Threaded Coupling
  • 2 x Collets
  • 1.6m PTFE Tubing (4mm OD for 1.75mm Filament) NOT PICTURED
  • 3 x 12v 30w Heater Cartridges
  • 1 x 100k Semitec Thermistor
  • 2 x Thermistor Cartridges
  • 100mm x Blue Fiberglass Sleeving
  • 1 x 2-Way Thermistor Cable
  • 3 x Extension Wires (Thermistors and Fan)
  • 6 x Zip Ties
  • 1 x 12v 30mm Fan
  • 1 x Cyclops Spanner
  • 2 x Silicone Socks
  • 1 x Thermal Comompound Paste Sachet

Cyclops Fixings Kit

Cyclops Cold Side Kit

  • 2 x Pastfast30 3.0 X 16 Screws
  • 3 x M3x10 Socket Dome Screw
  • 3 x M3 Washers
  • 4 x M3 Grub Screws
  • 1 x 1.5 mm Hex Wrench
  • 1 x 2 mm Hex Wrench

Cyclops Hot Side Kit

  • 4 x Ferrules
  • 1 x M3 Grub Screw
  • 2 x M4 Grub Screws
  • 1 x M3x3 Socket Dome Screw
  • 1 x M3 Washer
  • 2 x Bearing Balls

Universal Fixings kit

  • 2 x M3x10 Socket Dome Screw (for securing heater cartridge)
  • 1 x M3x3 Socket Dome Screw
  • 1 x M3 Washer (for securing heater cartridge)
  • 4 x Pastfast30 3.0 X 16 Screws (for securing fan)
  • 2 x M3 Grub Screws (for securing thermistor)
  • 1 x 1.5 mm Hex Wrench
  • 1 x 2 mm Hex Wrench
Copyright © 2016-2019 makerdise™ - Alle Rechte vorbehalten.